一种5 重real-time PCR筛查转基因水稻方法的建立

以转基因水稻中最常用的CaMV35S启动子、NOS终止子、Cry1Ab/Ac基因、HPT基因及SPS水稻内标基因为研究对象，利用5 种不同的荧光信号（FAM、HEX、Taxas Red、Cy5、Cy5.5）进行多重实时聚合酶链式反应（real-time polymerase chain reaction，real-time PCR）检测方法的研究。通过引物组合筛选、反应体系优化、特异性测试、灵敏度测试、适用性测试等一系列实验，建立了5 重real-time PCR方法，灵敏度可达0.032%。此方法具有灵敏度高、结果准确、通量大等优点，可实现水稻中转基因成分的快速、高效检测。     

Highly efficient full-fluorescence organic light-emitting diodes with exciplex cohosts

Full-fluorescence organic light-emitting diodes (FOLEDs) with low cost and high efficiency are imperious demands for commercial process in flat panel display and lighting products. We fabricated a series of FOLEDs employing C545T and DCJTB as doped dyes and different exciplex blends as cohosts. The results proved that reverse intersystem crossing (RISC) efficiency of exciplex cohost has a significant effect on the device performance. Devices with TAPC:PIM-TRZ as cohost which possessed the highest RISC efficiency showed the best results. The green FOLEDs exhibited the maximum external quantum efficiencies (EQEs) approaching to 20%, the red FOLEDs exhibited EQEs over 10% and all the EQE roll-offs are less than 10% at 1000 cd m⁻², which are among the best reported results so far, suggesting these exciplex cohosts are promising for FOLEDs.     

在轨维修后端模块接口机构的研究

在轨维修可以大大的延长空间科学仪器的使用寿命,节省大量的经济成本。为了实现空间望远镜后端模块的在轨操作和更换,设计了一套与之对应的接口机构,能够解决在轨快速定位与安装。根据321运动学定位准则,详细介绍了该接口机构的内部组成和工作原理;然后把该接口机构与后端模块进行组件级有限元仿真,仿真结果表明一阶模态远高于整机基频可以有效地避免发射时候的共振;设计了一套平面内的工装来模拟后端模块,利用等效质量法对整个机构进行重力卸载;搭建实验平台,利用激光跟踪仪来测量整个后端模块的重复定位安装精度,实验数据表明,X,Y,Z 3个方向的重复平移定位误差分别为±5.58μm,±3.24μm及±3.63μm,优于总体指标±10μm;热实验结果表明整个机构可以完全释放由于温度变化产生的形变,具有很高的热稳定性;使入射光线和靶面的相对位置持续稳定,保证了较高的成像质量。为其他空间在轨维护装置提供强有力的参考价值。     

蓝莓溃疡病生防链霉菌CX3的抑菌效果及其鉴定

[目的]为了明确从吉林省长白山保护区池西保护站马鞍山云杉人工林林下土壤分离,所获得1株拮抗菌株(编号记为CX3)的生防效果及分类地位。[方法]分别采用平板对峙法和杯碟法测定该菌株活菌及其发酵液的抑菌活性和抑菌谱;并通过形态学、生理生化特征、16S rRNA序列分析等方法研究了其分类地位。[结果]该菌株对13种供试植物病原菌均有抑制作用,抑菌谱广,其中对蓝莓溃疡病菌有极强的抑制作用,抑菌带达25.91 mm,发酵液的抑菌圈直径达31.73 mm;根据其菌株形态、生理生化特性、16S rRNA序列比对,最终鉴定菌株为链霉菌属Streptomyces sp.。[结论]该菌株对蓝莓溃疡病菌有显著的抑制效果,应用开发前景良好,此次是国内首次报道该菌株杀真菌活性。     

采用轮廓特征匹配的红外-可见光视频自动配准

为了精确地配准近平面场景下的红外-可见光视频序列,本文提出了一种基于轮廓特征匹配的自动配准方法,通过迭代匹配目标轮廓特征来解决异源图像中配准特征的提取和匹配难题。首先,采用运动目标检测技术获取目标轮廓,并由曲率尺度空间(CSS)角点检测算法提取轮廓特征点。此后,建立全局形状上下文描述子和局部边缘方向直方图描述子描述特征,从而实现可靠的特征匹配。来自不同时刻的匹配点对被保存在一个基于高斯距离准则的特征匹配库中。最后,为了克服近平面场景中目标深度变化的影响,本文结合前景样本随机抽样策略计算配准矩阵的损失函数,完成对全局配准矩阵的更新。在LITIV数据库上对方法进行实验验证,结果表明本文方法的配准精度优于当前先进的对比方法,在9个测试视频上的平均重叠率误差仅为0.194,与对比方法相比下降了18.5%。基本满足了近平面场景下红外-可见光视频序列配准的精度要求,且具有较高的鲁棒性。     

Highly stable and high power efficiency tandem organic light-emitting diodes with transition metal oxide-based charge generation layers

Tandem organic light-emitting diodes (OLEDs) have been studied to improve the long-term stability of OLEDs for 10 years. The key element in a tandem OLEDs is the charge generation layer (CGL), which provides electrons and holes to the adjacent sub-OLED units. Among different types of CGLs, n-doped electron transporting layer (ETL)/transition metal oxide (TMO)/hole transporting layer (HTL) has been intensively studied. Past studies indicate that this kind of CGL can achieve the desired efficiency enhancement, however, its long-term stability was reported not good and sometime even poor than a single OLED. This issue was not well addressed over the past 10 years. Here, for the first time, we found that this is caused by the unwanted diffusion of TMO into the underlying n-doped ETL layer and can be well resolved by introducing an additional diffusion suppressing layer (DSL) between them. Our finding will fully release the potential of TMO-based CGL in tandem OLEDs.     

Doping-free hybrid white organic light-emitting diodes with fluorescent blue,phosphorescent green and red emission layers

Industrialized white organic light-emitting diodes (OLEDs) currently require host-guest doping, a complicated process necessitating precise control of the guest concentration to get high efficiency and stability. Two doping-free, hybrid white OLEDs with fluorescent blue, and phosphorescent green and red emissive layers (EMLs) are reported in this work. An ultra-thin red phosphorescent EML was situated in a blue-emitting electron transport layer (ETL), while the ultra-thin green phosphorescent EML was placed either in the ETL (Device 1), or the hole transport layer (HTL) (Device 2). Device 2 exhibits higher efficiency and more stable spectrum due to the enhanced utilization of excitons by ultra-thin green EML at the exciton generation zone within the HTL. Values of current efficiency (CE), power efficiency (PE), and CRI obtained for the optimized hybrid white OLEDs fabricated through a doping-free process were of 23.2 cd/A, 20.5 lm/W and 82 at 1000 cd/m², respectively.     

基于DSP的多元数据同步采集与存储系统的设计与实现

从硬件和软件两个角度出发,介绍基于DSP的多元数据同步采集与存储系统的组成、工作模式以及功能的测试。系统主要由上位机和数字采集与存储单元组成,其中数字采集与存储单元的硬件部分包括电源模块,值班电路模块,数据采集模块,数据存储模块,时钟同步模块。系统采用DSP作为中央处理芯片,利用经过同步后的秒脉冲作为触发信号,实现同步数据采集。以CF卡作为存储介质,实现数据自容式存储。软件部分实现自检、同步、数据采集存储功能。经过测试,系统工作稳定,功能正常,同步精度在100ns以内。     

RV减速器扭转刚度计算

扭转刚度是影响机器人运动精度、定位精度和重复定位精度的重要参数之一,本文通过对RV减速器内部齿轮副啮合刚度和各类型轴承刚度理论计算,提出了建立两个RV减速器虚拟样机,即在齿轮传动专业软件Romax中建立虚拟样机1,计算出系统变形引起的扭转刚度K1;同时在通用仿真动力学软件中建立虚拟样机2,计算出RV减速器回滞曲线,通过回滞曲线计算出扭转刚度K2,采用弹簧串联原理,计算了RV减速器扭转刚度K并通过试验验证了此方法的正确性。